搜索历史清除全部记录
- All
- Product Management
- News
- Introduction
- Enterprise outlets
- FAQ
- Enterprise Video
- Enterprise Atlas
Magnetic North
PRODUCTS
Vehicle-mounted intelligent payment terminal M10
Key words:
Classification:
Share:
Product Characteristics
-
-
Payment Method
Support non-contactIC card transactions, NFC non-connected transactions, in line with ISO14443 specifications
-
-
-
international norms
SupportPSAM Validation to ISO7816 Specification
-
-
-
Sweep CodeIdentification
Support domestic and international common one-dimensional code, two-dimensional code recognition
-
-
-
Positioning
SupportGPS, Beidou positioning
-
-
-
Communication
SupportCommunications such as LAN, 2G, 3G, 4G, WiFi, and BT
-
Product Application
|
Serial Number |
Description |
|
CPU |
Zhanrui 8541 Quad Core 1.4GHz Arm Cortex-A53 CPU |
|
Memory |
2G RAM 16G FLASH |
|
SD Card |
Can support Mircro SD(TF) card interface, maximum support 256GB (optional) |
|
Operating System |
Android 10 |
|
Display |
7 inch industrial specifications LCD screen, 1024*600 pixels |
|
Key |
Flip up/down/confirm/cancel |
|
Back display |
4 field code screen |
|
Non-connected card reader |
Support ISO14443 TypeA & TypeB,Mifare series contactless card reading and writing |
|
Operating frequency: 13.56MHz |
|
|
Optional support for embedded ID reading module Can support reading resident identity cards and permanent residence permits for foreigners |
|
|
Non-connected transaction speed |
≤ 0.3 seconds |
|
Non-connected read-write distance |
≤100mm |
|
PSAM card holder |
Support 4 PSAM decks, in line with ISO7816 specifications, support PPS protocol |
|
Real Time Clock |
Embedded real-time clock, error is less than 5 seconds/month |
|
Buzzer |
Support |
|
Voice Prompt |
Support voice prompts, clear and bright voice, adjustable volume |
|
Support TTS voice |
|
|
LED indicator |
Card status indicator (red and green) |
|
Wireless status indicator (yellow) |
|
|
1D & 2D scanner |
Using the industry's advanced 1D & 2D sweep dock, CMOS image sensor, hard decoding |
|
Support QR Code, Micro QR,PDF417,Data Matrix and other two-dimensional code formats, as well as Code 128, EAN-13, EAN-8, Code 39, UPC-A and other one-dimensional code formats |
|
|
Interface |
1 power port (M12-3P aviation head: power, GND, ACC) |
|
1 RS232 interface and 1 RS485 interface (M12-7P aviation head) |
|
|
1 USB A port |
|
|
1 USB C port |
|
|
1 PCI slot for extended 4G communications |
|
|
1 Ethernet interface and 1 CAN interface (M12-6P aviation head) |
|
|
2 SIM card slots |
|
|
Power switch |
Boat switch |
|
Wireless Communication |
GSM、3G、4G LTE |
|
WiFi 2.4/5GHz, 802.11a/b/g/n/ac |
|
|
Bluetooth 5.0 (BR/EDR BLE) |
|
|
Built-in antenna |
|
|
GPS |
(External antenna) Support A- GPS, GLONASS, Beidou |
|
Encryption and Security |
Embedded security algorithm library, support SM2/SM3/SM4 and other dense algorithm |
|
Power |
DC 8V ~ 40V wide voltage, with reverse connection, overvoltage and overcurrent automatic protection automatic recovery and other functions |
|
Waterproof and dustproof |
IP65 |
|
Environmental parameters |
Working temperature: -20 ℃ ~ 70 ℃ |
|
Storage temperature: -40 ℃ ~ 80 ℃ |
|
|
Storage humidity: 60 ℃,95% RH |
|
|
Working humidity: 50 ℃,5% ~ 95RH |
Product Parameters
Related products
Al Processing Units
-
Binocular passenger flow statistics instrument QC090
The binocular passenger flow statistics instrument QC090 is an embedded product based on non-contact binocular stereo vision technology. The product has the characteristics of powerful function, good scalability, strong stability, and high cost performance. It can be widely used in mobile vehicle environments with strong vibration, such as buses, buses, subways, trains, ships, etc., and can be easily installed in Car doors, roofs, walls, ceilings and other places accurately count the number of passengers passing through.
-
Safe driving assistance terminal QD003
Safe driving assistance terminal QD003 is a vehicle-mounted terminal device in the vehicle comprehensive monitoring information system. AI algorithm is used to process the input data of active safety camera. ADAS can remind the driver before collision or when changing lanes unintentionally. DMS can analyze the driver's fatigue and distraction in real time and issue timely warnings to avoid dangerous accidents. At the same time, the safe driving assistance terminal QD003 can also expand the pedestrian collision function and video monitoring function in the right blind area. The collision warning and monitoring video are sent to the platform server or stored in the SD card of the device through QD003, which is convenient for monitoring and vehicle management.
-
Face recognition alcohol detection terminal QJ001
Face recognition alcohol detection terminal QJ001 is a terminal device integrating credit card attendance, face recognition attendance, body temperature screening, alcohol detection and blood pressure pulse rate measurement. Check the source, it is strictly prohibited for drivers to drive in the state of drinking, and drivers can participate in the operation and production only after passing the test. Carrying out alcohol testing for bus drivers can not only effectively prevent the occurrence of "overnight alcohol", but also instruct and observe the driver's mental outlook and state. It is not only responsible for the driver's personal safety, but also a powerful guarantee for the safety of passengers. In the future, a long-term mechanism will be formed to ensure the safety of passengers while also sounding the alarm for drivers.
Passenger Information System
-
In-car LCD guide screen
28.6 inch bar screen using LED backlight, display brightness more uniform, wider color gamut. Industrial-grade design, with ultra-high reliability and high stability, and the average trouble-free operating time exceeds 50000 hours. Using Hess HI3751V310 two-core multimedia network player-LCD driver integrated board, running Android 4.4. The highest support 4K 30HZ signal input and decoding, decoding ability, system stability. Support bar screen driver display, resolution can be freely switched through U disk, and point-to-point display can be realized. Support stand-alone program playback function, support U disk or TF card playback; The motherboard provides HDMI,TF,USB and other ports to facilitate access to various signal sources.
-
Bus LED display QL010
QL010 series LED road signs are installed on tourist buses, buses and other vehicles, and are used to display LED bus electronic road signs such as line information. Through the vehicle terminal communication, the switching of line information and other contents is realized, which brings convenience to passengers and improves the operation efficiency of bus companies.
-
22 inch TV all-in-one QL022-AH
QL022-AH 22-inch TV all-in-one machine uses a new generation of upgraded IOT intelligent motherboard, which uses RK3568 Cortex-A55 quad-core CPU,2.0G main frequency and Android13 system. Rich peripheral interface, covering USB2.0, USB3.0, RS485, GPIO, network port, high-definition HDMI input and output.
-
Monochrome LED
QL010 series LED road signs are installed on tourist buses, buses and other vehicles, and are used to display LED bus electronic road signs such as line information. Through IPXPT protocol network or vehicle terminal communication, the switching of line information and other content is realized, which brings convenience to passengers and improves the operational efficiency of bus companies.
-
LED sign QL010
QL010 series LED road signs are installed on tourist buses, buses and other vehicles, and are used to display LED bus electronic road signs such as line information. Through IPXPT protocol network or vehicle terminal communication, the switching of line information and other content is realized, which brings convenience to passengers and improves the operational efficiency of bus companies.
Displays
-
7-inch Driver Display Terminal P6
The 7-inch driver display terminal P6 is an interpersonal interaction platform between the driver and the vehicle-mounted intelligent terminal. It has functions such as displaying the working status of the vehicle-mounted intelligent terminal, viewing central messages, checking local recordings and videos, and driver card swiping. It can also automatically adjust the screen brightness according to changes in ambient light and can be expanded with a breathalyzer accessory for pre-shift alcohol testing of drivers. The P6 is feature-rich and easy to operate, making it a widely used vehicle-mounted intelligent terminal accessory in the fields of buses, passenger vehicles, and long-distance trucks.
-
Driver display terminal P10
The driver display terminal P10 is a human-computer interaction platform between the driver and the ITS system. It has the functions of displaying the working status of ITS system, navigation, viewing center messages, viewing local videos and videos, reversing monitoring, etc. And can automatically adjust the brightness of the screen according to the change of ambient light, install customer applications, etc. P10 features rich, easy to operate, is a widely used in buses, passenger cars, long-distance trucks and other commercial vehicles in the field of vehicle display terminal.
-
Driver display terminal P7
The driver display terminal P7 is a human-computer interaction platform between the driver and the ITS system. It has the functions of displaying the working status of ITS system, navigation, viewing center messages, viewing local videos and videos, reversing monitoring, etc. And can automatically adjust the brightness of the screen according to the change of ambient light, install customer applications, etc. P7 features rich, easy to operate, is a widely used in buses, passenger cars, long-distance trucks and other commercial vehicles in the field of vehicle display terminal.
-
Driver display terminal P20
The driver display terminal P20 is a human-computer interaction platform between the driver and the ITS system. It has the functions of displaying the working status of ITS system, navigation, viewing center messages, viewing local videos and videos, reversing monitoring, etc. And can automatically adjust the brightness of the screen according to the change of ambient light, install customer applications, etc. P20 features rich, easy to operate, is a widely used in buses, passenger cars, long-distance trucks and other commercial vehicles in the field of vehicle display terminal.
-
7 inch inverted monitor screen QP001
QP001 is a 7-inch standard definition LCD screen, supports multi-channel video input, supports reversing switch door video switching, and ensures travel safety.
MDVRS
-
Vehicle-mounted intelligent terminal Z20
The vehicle-mounted intelligent terminal Z20 integrates satellite positioning monitoring, 16 channels 1080P HD video monitoring, 4G wireless communication, emergency alarm, voice broadcasting, LED/LCD display control and rich expansion interface functions. With multi-core processor and powerful neural network engine, it supports a variety of AI intelligent functions, passenger flow statistics, ADAS, DSM, BSD. The vehicle-mounted intelligent terminal integrates scheduling, management, monitoring and passenger flow statistics, and integrates the three key functions of driver behavior analysis (DMS), assisted driving early warning (ADAS) and blind spot detection (BSD). The driver DMS camera can monitor the driver's driving behavior in real time, such as monitoring and alarming the driver's driving behavior such as fatigue driving, smoking, and making phone calls while driving. The front-view ADAS camera can monitor the front dynamics of the vehicle in real time, such as potential collision risks, too close to the vehicle, high-limit road signs and other critical situations, and remind the driver to pay attention through warning tones to effectively avoid accidents. Is a widely used in buses, passenger cars, long-distance trucks and other commercial vehicles in the field of vehicle-mounted intelligent terminal.
-
Vehicle-mounted Intelligent Terminal B10-20
The vehicle-mounted intelligent terminal B10-20 integrates satellite positioning monitoring, 16 channels 1080P HD video monitoring, 4G wireless communication, remote dispatching, emergency alarm, voice broadcasting, LED/LCD display control and rich expansion interface functions. With multi-core processor and powerful neural network engine, it supports a variety of AI intelligent functions, passenger flow statistics, ADAS, DSM, BSD. The intelligent driving active safety prevention system integrates scheduling, management, monitoring and passenger flow statistics, and integrates the three key functions of driver behavior analysis (DMS), assisted driving early warning (ADAS) and blind spot detection (BSD). The driver DMS camera can monitor the driver's driving behavior in real time, such as monitoring and alarming the driver's driving behavior such as fatigue driving, smoking, and making phone calls while driving. The front-view ADAS camera can monitor the front dynamics of the vehicle in real time, such as potential collision risks, too close to the vehicle, high-limit road signs and other critical situations, and remind the driver to pay attention through warning tones to effectively avoid accidents. Is a widely used in buses, passenger cars, long-distance trucks and other commercial vehicles in the field of vehicle-mounted intelligent terminal.
-
Vehicle-mounted intelligent terminal Z8
The vehicle-mounted intelligent terminal Z8 integrates satellite positioning monitoring, 8-channel 1080P high-definition video monitoring, 4G wireless communication, remote dispatching, emergency alarm, voice broadcasting, LED/LCD display control and rich expansion interface functions. With multi-core processor and powerful neural network engine, it supports a variety of AI intelligent functions, passenger flow statistics, DMS, ADAS. The intelligent driving active safety defense system integrates scheduling, management, monitoring, and passenger flow statistics, and integrates the two key active safety functions of driver behavior analysis (DMS) and assisted driving early warning (ADAS). The front-view ADAS camera can monitor the front dynamics of the vehicle in real time, such as potential collision risks, too close to the vehicle, high-limit road signs and other critical situations, and remind the driver to pay attention through warning tones to effectively avoid accidents. Is a widely used in buses, passenger cars, long-distance trucks and other commercial vehicles in the field of vehicle-mounted intelligent terminal.
-
New energy monitoring terminal D05
T-BOX intelligent terminal D05-20 integrates 3G/4G wireless communication, WIFI, Ethernet, GPS/BD dual-mode positioning and CAN/OBD vehicle data diagnosis technology. It is a terminal specially designed for modern intelligent network connection. The terminal supports deep reading of vehicle CAN data, collection, storage and transmission of vehicle data, analysis of engine emission status and DTC fault data, and is applicable to diesel vehicles and new energy vehicles.
Acoustic lmager
-
Drone Pod Acoustic Imaging Locator D06
Compared to similar acoustic imaging products on the market, the drone version of the intelligent acoustic imager has the following main technical advantages: 1. It can be mounted on the DJI M300 drone for high-altitude flight inspections; 2. Wide frequency acoustic imaging range: 10KHz to 80KHz; 3. High resolution and high refresh rate imaging effect: 64 sensors, over 25 FPS; 4. Supports automatic threshold triggering, with intelligent interpolation algorithms that calculate and adjust the interpolation, automatically setting the upper and lower limits for positioning imaging, filtering out interference signals in noisy and disturbed environments; 5. Capable of overlaying typical phase spectrum of ultrasonic partial discharge (PRPD) and comprehensive analysis and evaluation functions for further analysis of ultrasonic signals and fault diagnosis; 6. One-click automatic frequency selection to quickly lock onto the frequency range with the highest signal concentration; 7. Supports up to 4x zoom for clearer imaging effects; 8. Comes with backend software for intelligent identification of discharge types.
-
Handheld Acoustic Imaging Device U2
The handheld acoustic imager (hereinafter referred to as U2) is a single-handed industrial acoustic imaging device that supports ultrasonic frequency ranges from 1 to 100 kHz. The instrument utilizes microphone array beamforming technology to obtain sound source distribution data, and combines it with a high-definition camera to capture video images in real-time. By fusing the sound source distribution data with the video images, it dynamically presents the changing sound sources on the display screen. It is also compatible with infrared thermal imaging functionality. The U2 acoustic imager can help you quickly detect power leaks and potential leaks in air and vacuum in noisy environments; it also has the capability to capture images or videos, allowing you to store and replay the detected images and videos or generate inspection reports.
-
Industrial Acoustic Imager U1 (Gas Leak Version)
Industrial Acoustic Imager (hereinafter referred to as U1) is an intuitive and easy-to-use tool. In the scene of industrial gas production or use, gas pipeline is easily leaked due to weather, man-made damage and natural corrosion. As the sound amplitude of gas leakage is difficult for human body to perceive, when gas leaks, the inspector's failure to repair in time leads to untimely maintenance, which will cause great losses to the economy and gas explosion accidents.
-
Industrial Acoustic Imager U1 (Power Board Version)
The Industrial Acoustic Imager (hereinafter referred to as U1) is an intuitive and easy-to-use tool that can identify the sound frequency of the local sound. It uses 132 highly sensitive digital microphone arrays to convert the collected sound into visible light images and presents them on the screen in the form of maps to help the team detect the local sound as early as possible.
Smart Payment
-
Vehicle-mounted intelligent payment terminal M10
M10 terminal is a vehicle-mounted payment terminal. Currently, Android 10 operating system is equipped with a 7-inch LCD screen, which supports card swiping and code scanning transactions and allows offline transactions. After networking, transaction data can be uploaded to the background normally. The terminal has a strong expansion function.
-
QM095 Cloud Speaker
The QM095 cloud speaker is a small audio device that integrates payment functionality, primarily used by merchants for voice announcements during transactions to ensure that every payment is confirmed and recorded in a timely manner. It comes with built-in network capabilities, allowing it to reliably receive payment notifications even in areas with poor signal. The operation is simple; just plug it in to use, making it suitable for small convenience stores and street vendors. Each successful payment will trigger a clear voice prompt, facilitating confirmation of payment status for both merchants and customers. A customizable TFT color screen version is available, supporting dynamic QR codes and advertisement playback.
-
QM096 Cloud Speaker
The QM096 cloud speaker is a small audio device that integrates payment functionality. The speaker and the code card are designed to snap together for easy disassembly, making it suitable for various practical scenarios with merchants. It allows for flexible payment collection and has built-in network capabilities, ensuring stable receipt of payment notifications even in areas with poor signal. The operation is simple; just plug it in to use, making it ideal for small convenience stores and street vendors. Each successful payment will trigger a clear voice prompt, helping both merchants and customers confirm the payment status.
-
Scan box
The QR code scanner box is a device specifically designed for QR code payment. It typically connects to the merchant's cash register system via USB or Bluetooth, allowing for quick recognition of the customer's payment QR code and transmitting the payment information to the merchant's backend system for processing. It can easily recognize both 1D and 2D codes, ensuring no omissions. The application scenarios are wide-ranging. After a successful scan, it can provide voice announcements to inform about the payment method and amount, enhancing the user experience. It is suitable for various fields such as supermarket checkouts, self-service terminals, and food retail, particularly excelling in scenarios that require fast and efficient transaction completion.
-
Barcode scanner
The barcode scanner scans barcodes using optical principles, decodes the information contained in the barcodes, and transmits it to a computer or other devices via data cables or wirelessly. Its application scenarios are very broad, including supermarkets, logistics and express delivery, libraries, etc., for scanning product and document barcodes. In addition, with the increasing use of barcodes and QR codes, the application scenarios for barcode scanners are also expanding, such as in payment scanning, product traceability, quality control, asset management, government processing, inventory counting, and express logistics.
-
Cloud Printer
Cloud printers are an enhancement of traditional printers with added "cloud" functionality, allowing users to send print jobs directly from their mobile phones, tablets, or computers, breaking the limitations of wired connections and distance. Users can submit print jobs through a cloud platform, and the printer will print the tasks upon receipt without manual intervention. In the food and retail industry, cloud printers can automatically receive and print orders without manual operation, significantly improving work efficiency.
Other
-
On-board sign controller
Car signboard controller, is used to control the LED dot matrix screen related upgrade, display content, display form, change the line and other functions of the product.
-
USB charger QB009
QB009 is a dual-port car USB charger that supports multi-fast charging protocol. It supports A- port fast charging output and has protection such as overcurrent, overvoltage and output short circuit. It is safe and reliable. It can charge the passenger's mobile phone, PAD and other digital products, enhance the passenger ride experience, and improve the service evaluation of passenger transport companies.
-
Bluetooth power amplifier QM060 single spindle
QM060 series Bluetooth power amplifier is a car power amplifier, is a professional long-distance bus, bus, bus, and ship trains and other mobile carriers designed a high-performance multi-function karaoke entertainment system.
-
Life detection sensor QROO1
The life detection sensor QR001 uses radar technology and can detect micro-motion. It can identify if there are any people or animals stuck in a hidden or semi-hidden space.
-
Dual port USB charger QB005
QB005 series product is a USB on-board fast charger that can be installed on passenger vehicles. It provides passengers with charging interfaces for mobile phones, PAD and other digital products, effectively bringing convenience to passengers and improving the overall service satisfaction of passenger transport companies. QB005 series product type has double TYPE-A port output, double TYPE-C port output and TYPE-A port TYPE-C port output three.
-
Dual port USB charger QB010
QB010 series product is a USB car fast charger that can be installed on passenger vehicles. It provides passengers with charging interfaces for mobile phones, PAD and other digital products, effectively bringing convenience to passengers and improving the overall service satisfaction of passenger transport companies. QB010 series product type has TYPE-A port TYPE-C port output one.
-
Infrared Conch Camera QC001
Product name: infrared conch camera Product model: QC001
-
Infrared horizontal waterproof camera QC002
Product name: infrared horizontal waterproof camera Product model: QC002
-
Infrared Conch IPC Camera QC036
Product name: infrared conch camera Product model: QC036
-
Infrared square waterproof camera QC003
Product name: infrared square waterproof camera Product model: QC003
-
PON switch QS001
PON switch is mainly used for vehicle intelligent terminal IPC camera expansion scene, supporting applications in the field of vehicle monitoring.
-
USB charger QB008
QB008 is a single-port car USB charger that supports multi-fast charging protocol. It supports A- port fast charging output and has protection such as overcurrent, overvoltage and output short circuit. It is safe and reliable. It can charge the passenger's mobile phone, PAD and other digital products, enhance the passenger ride experience, and improve the service evaluation of passenger transport companies.
-
Car Internet Router QM003
Car router QM003 is a high-performance industrial router, its CPU frequency is less than 560MHz, can calmly face a variety of applications. The hardware based on Qualcomm Atheros WiFi technology has super performance and strong anti-interference ability, which enables the on-board router to work stably in various complex environments.
-
Three-roll gate
The three-roller gate is a type of passage control device mainly used to manage the entry and exit of personnel. It consists of three metal rods forming a spatial triangle, usually made of hollow, closed stainless steel pipes, which are sturdy and not easily deformed. It achieves blocking and releasing through rotation; it is suitable for office locks, commercial places, and public areas such as buses, ferries, and bus stations.
Leave Us A Message Now
Attention: We Can Produce Customized Products. If Necessary, Please Make Sure To Accurately Fill In The Information And Maintain Smooth Communication. We Will Contact You As Soon As Possible.
Social Media
Contact Information
Add: 6F-8F, Building #6-2, Anren Industrial Park, Xiamen City, Fujian Province, China
E-mail: market@amoymn.com
All Rights Reserved © 2024 Xiamen Magnetic North Technology Co., Ltd.